DB-6600+ Receiver's System Menu

from left you find the System Menu screen captured, includes:

Installation

here has most of the installation related settings that you need to verify or change.

Telstar5 is the default setting

1. Dish Setup

Your default Dish 1 shopuld be

Dish: 1

Dish Type: Fixed

Satellite: List (Telstar 5)

LNB1: Normal 5150MHz 10750Mhz

2.Transponder Setup

This is the page that you need when setup the outside dish and aiming, you need to have the yellow bar shown, it locked the signal and ensure your picture quality, must be over 50 and turn in yellow color.

No quality bar = No picture

tune your dish until you get the quality bar turns into yellow.

Channel Edit

edit channel setting of TV or Radio

Options

Shows all of the TV system Settings,

PID Edit

To add or modify the Channel video id, audio id settings, when auto channel search can't find the specific channels. For manually modify.

Timer

Adjust your own time

Setup With H-H-Mount Motor SG-2100

Different Setting for you when you have H-H mount Drive Motot

From Dish setup:

1. change your dish type to DiSEqC 1.2

2. adjust the Ease and West Limit, then save.

From the transponder setup:

3. you will see the Motor function come out. use your remote control to move the dish East or West until the satellite locked