COSHIP CDVB5300CI Receiver's System Menu

User Installation

Antenna Setup

Select the Satellite name you want from the list.

here has most of the installation related settings that you need to verify or change.

you need to select the lnbf type and a working tp for tuning the signal.

lnbf : ku band Normal 10750, most of the lnbf use 10750 as the American standard.

or universal 10600 ex: ( If you have Universal LNBF like 321-2 LNBF , then use Universal.

LO - Low 9750 High 10600 ) model asc321-2.

TP(Transponder): use a working ku band Transponder frequency

C band Frequency is 4 digits, ex: 4444 , if you are using ku band dish to find the satellite, then don't use the c frequency, which is 4 digits Frequency.

Ku band frequency is 5 digits, ex 55555, use a good working transponder Frequency to tune your antenna.

If you have sg2100 motor: Enable the DiSEqC 1.2 setting under the Antenna Setup type.

Press the Green button on the remote to set up the limit.

• Move motor by remote or manually press the motor direction button to the limit.
• store east when dish at the end of east side
• store west limit when dish at the end of west side

Setup With H-H-Mount Motor SG-2100

you will see the Motor function come out. use your remote control to move the dish East or West until the satellite locked. remember to save all data into the system database when exit or power down.

No quality bar = No picture

Recommend you to use those as following:

SAT: Freq/Symbol/Pol

G3C: Freq: 11780 / 20760/H

T5: Freq: 11836/20765/V

T5: Freq: 12177/23000/V

AMC4: Freq: 11860/28130/H

Use this screen when you are tuning the dish to get the signal, after that, scan the satellite to get the channels list.

the left screen shot is showing the Yellow bars of both Level and Quality, it means that satellite is locked. Do the Satellite Scan AFTER you completely the satellite locking. Locked the signal and ensure your picture quality.

Channel Manager

TV and Radio Channel

edit channel setting of TV or Radio

Timer

Time adjustment

From left you find the System Menu screen captured, includes:

Program Guide

EPG

SCROLLING SCREEN PROBLEM

Switch between PAL and NTSC TV Type. Do as follow: press

menu

right arrow 3 times

down arrow 2 times

press ok

down arrow 5 times

left arrow, toggle it till you see it normal

CI Function

You can insert any type of the PCMCIA CAM.

Remember face down when.use the cam card